Husqvarna Husqvarna M-ZT52 - 967 17 70-05 / NOT AVAILABLE
Double tap to zoom
Husqvarna M-ZT52 - 967 17 70-05
Commercial
Overview:
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Loan Calculator
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
Roll Over Protection System (ROPS)
The practical foldable ROPS protects the user and can be lowered in areas with low-hanging branches.
Heavy Duty Fabricated Deck
The robust cutting deck features twin 11 gauge sheet (1/4” combined) construction for added structure and spindle support. Cast iron blade spindles, impact resistant discharge shields and reinforced scalp rollers add to the commercial duty design.
Cast Iron Spindle Housings
Bold cast iron blade housings built for durability and featuring sealed ball bearings.
Commercial drive system
Hydro-Gear's ZT3400 series commercial transmissions are fully serviceable and offer higher ground speeds with smooth performance.
Specifications
| Cutting deck | |
| Cutting width | 52 in |
| Cutting deck type | Fabricated |
| Cutting methods | Collect/Mulch/Side discharge |
| Cutting deck material | Steel |
| Deck thickness | 11 gauge |
| Cutting height steps | 12 |
| Blade engagement | Electric clutch |
| Clutch rating | 200 ft.lb |
| Blades | 3 pcs |
| Blade-tip speed | 19000 fpm |
| Anti-scalp wheels | 3 |
| Nose roller | Yes |
| Deck lifting system | Manual, foot assisted |
| Powder-coated cutting deck | Yes |
| Spindle/mandrel type | Cast iron |
| Greasable mandrels | Yes |
| Deck Wash Port | No |
| Cutting height, min (approximate) | 1.5 in |
| Cutting height, max (approximate) | 4.5 in |
| Drive system | |
| Transmission type | Hydrostatic |
| Transmission manufacturer | Hydro-Gear |
| Transmission model | ZT 3400 |
| Pump displacement | 12 cm³ |
| Fan-cooled pumps | Yes |
| Equipment | |
| Seat material | Vinyl |
| Seat spring | Yes |
| Seat back height | High |
| Hour meter type | Yes |
| Cup holder | Yes |
| Armrests | Yes |
| ROPS | Yes |
| Seat type | Premium |
| Capacity | |
| Productivity | 4.2 acres/hr |
| Speed forward max | 10 mph |
| Speed forward min | 0 mph |
| Dimensions | |
| Base machine, length | 75.5 in |
| Base machine, width (chute down) | 67 in |
| Base machine, width (chute up) | 54 in |
| Weight | 760 lbs |
| Base machine, height (ROPS down) | 45.5 in |
| Base machine, height (ROPS up) | 72 in |
| Tire size, front Width | 6.5 in |
| Tire size, front Diameter | 13 in |
| Tire size, front Diameter wheel | 6 in |
| Engine | |
| Motor/engine manufacturer | Briggs & Stratton |
| Engine name | Endurance Commercial |
| Power output | 26 hp |
| Cylinder displacement | 49.4 cu.inch |
| Cylinders | 2 |
| Engine cooling | Air |
| Air filter type | Heavy Duty (Cyclonic) |
| Power/fuel type | Gasoline |
| Engine lubrication type | Full pressure |
| Oil filter | Yes |
| Fuel tank volume (with reserve) | 5 gal (US) |
| Fuel tank location | Side (Single) |