Features
Performance Features
- Custom axle isolators reduce g-force shock loads travelling through the axle and deck and eventually felt in the tractor seat
- Replaceable 1/2″ Cast Wing Skids for extended wear during heavy ground contact
- Angled rear deck section with 41% longer skids improve durability during side and backward impacts
- Center section axle spindles are centered on the axle arm for equalized loading of vertical forces
- Grease fittings and spring steel bushings at axle pivot points for longer life
- Wing decks free float 22° down and 45° up without engaging the hydraulic cylinder for longer cylinder life
- Rollover and Clevis Stops on the Perma-Level+ Hitch make tractor hookups easier
- Increased Cutting and Transport Height by 2″ to mow down taller vegetation and facilitate loading on trailers
Performance Features
- Custom axle isolators reduce g-force shock loads travelling through the axle and deck and eventually felt in the tractor seat
- Replaceable 1/2″ Cast Wing Skids for extended wear during heavy ground contact
- Angled rear deck section with 41% longer skids improve durability during side and backward impacts
- Center section axle spindles are centered on the axle arm for equalized loading of vertical forces
- Grease fittings and spring steel bushings at axle pivot points for longer life
- Wing decks free float 22° down and 45° up without engaging the hydraulic cylinder for longer cylinder life
- Rollover and Clevis Stops on the Perma-Level+ Hitch make tractor hookups easier
- Increased Cutting and Transport Height by 2″ to mow down taller vegetation and facilitate loading on trailers
Safety Features
- Single or Double Row Chains to keep flying debris within the deck
- Cast transport lock supports the weight of the cutter while transporting
- Cast Wing Locks hold the wings stable when in an upright position
- Rollover and Clevis Stops reduce rotating and swinging hitch components while attaching to tractor drawbar
- 360° coverage around rotating drivelines
- LED safety lighting standard
Product Features
- Available with or without Deck Rings
- Heavy-Duty axles are cushioned by custom-tuned rubber isolators in each axle arm
- 130HP gearboxes are driven by Cat 4 Wing Drivelines with slip-clutches
- Our Patent-Pending Driveline Assist carries the load when connecting the heavy Cat 6 CV driveline to the tractor PTO
Specifications
| Models | 3112 |
| Cutting Width | 12.2′ |
| Cutting Height | 1 1/2″ - 14″ |
| Cutting Capacity | 3 1/2″ |
| Transport Width* | 6′ 11″ |
| Transport Height** | 6′ 5″ |
| Transport Length*** | 15′ 2″ |
| Approximate Weight (lb.) | 4,300 |
| Approximate Tongue Weight (lb.) | 1,400 |
| Minimum Tractor PTO HP | 55 |
| Hitch | "Perma-Level+" standard |
| Center Deck | 10ga |
| Wing Decks | 10ga |
| Wing Cutting Angles | 22° Down and 45° Up |
| Wing Level Adjustment | Turnbuckles |
| Sidebands | 1/4″ x 12″ |
| Transfer Gearbox (HP) | 160 |
| Cutting Gearboxes (HP) | 130 |
| Input Driveline | Category 6 |
| Wing Drivelines | Category 4 |
| Blade Holder | 7ga Round |
| Blades | 1/2″ x 4″ |
| Blade Tip Speed (fpm) | 15,500 |
| Axle Suspension | Cushioned Isolators in Each Axle Arm |
| Center & Wing Hydraulics | Included |
| Safety Tow Chain | Included |
| Distribution Baffles | N/A |
| PTO Driveline Assist | Standard |