Bush Hog 1812
Double tap to zoom
1812
1812 Flex-Wing Rotary Cutters
Overview:
The 1812 Flex-Wing Rotary Cutter is designed for small tractors with a PTO horsepower of 50 to 75. The narrow cutting width of 12-feet makes this Flex-Wing ideal for rolling terrain where a wide rigid cutter will not perform as well. Grass, weeds, and brush up to 1 1/2-inch diameter are no match for the hardened parallel uplift blades. The narrow width is also ideal for orchards with prunings that must be cut into smaller pieces. The 1812 has maintenance friendly features, E-Z cleaning decks, high performance cutting and distribution, and it is built Bush Hog® tough for years of reliable service.
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Loan Calculator
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
Performance Features
- E-Z clean smooth decks are on the center and wings.
- Wing “free float” without movement of wing hydraulic cylinder rod extends cylinder life.
- Gearbox oil sight gauge allows the checking of the oil level in a few seconds.
- PTO driveline holder is standard.
- Wheel spindles are in halves for economy and ease of maintenance.
- A single hydraulic hose is standard for lifting. Two hoses are optional for lifting wings independently of center section.
Construction Features
- Center section cushions are at each axle arm to absorb shocks near the wheels.
- Replaceable full length sideband skids give maximum protection and strength to the sideband.
- Wheel hub cap retainers are standard to prevent loss of cap and hub grease.
Safety Features
- Safety lights for highway travel are standard.
Product Features
- Full Length Sideband Skids
- Each axle arm on the center section has a rubber cushion to absorb the shock loads near the wheels. Shown with optional dual tires on the center.
- Patented oil sight gauge in all three cutting gearboxes for quick and easy monitoring of oil levels.
Specifications
| MODELS | 1812 |
| CUTTING WIDTH | 12' |
| CUTTING HEIGHT | 2″ -13″ |
| CUTTING CAPACITY | 1 1/2″ |
| TRANSPORT WIDTH* | 6′ 8″ |
| TRANSPORT HEIGHT** | 5′ 8″ |
| TRANSPORT LENGTH*** | 13′ 7″ |
| APPROXIMATE WEIGHT (LB) | 3,200 |
| APPROXIMATE TONGUE WEIGHT (LB.) | 1,100 |
| MINIMUM TRACTOR PTO HP | 50 |
| HITCH | CAST SWIVEL CLEVIS |
| CENTER DECK | 10GA |
| WING DECKS | 10GA |
| WING CUTTING ANGLES | 22° DOWN AND 45° UP |
| WING LEVEL ADJUSTMENT | TURNBUCKLES |
| SIDEBANDS | 1/4″ X 11 1/2″ |
| TRANSFER GEARBOX (HP) | 160 |
| CUTTING GEARBOX (HP) | 65 |
| INPUT DRIVELINE | CATEGORY 4 |
| CUTTING DRIVELINES | CATEGORY 3 |
| BLADE HOLDER | 11GA OVAL |
| BLADES | 1/2″ X 3″ |
| BLADE TIP SPEED (FPM) | 14,504 |
| AXLE SUSPENSION | RUBBER PADS (CENTER) |
| CENTER & WING HYDRAULICS | 1 HOSE STANDARD |
| SAFETY TOW CHAIN | STANDARD |
| DISTRIBUTION BAFFLES | N/A |
| PTO DRIVELINE SUPPORT | N/A |
*Measured from Wing Skid to Wing Skid when Folded
**Measured at Maximum Transport Height
***Measured from hitch tip to rear of 21″ Laminated Tire
Our Showrooms
-
3000 Pegasus Dr
Bakersfield, CA 93308 661-323-7817 Get DirectionsCopyright © 2017 - 2025 Site by M.D. EquipmentLocator.com