Befco C50-RD7H

• Highly engineered & rugged gearbox with cooling fins
• Spiral gears guarantee strength and quietness
• Cutting heights: from 1″ to 5″
• Front & rear tractor mounting
• 4 rubber swivel tires with bearings to guarantee a perfectly level cut
• Stamped steel reinforced wheel arm attached by 8 bolts for maintaining a consistent cutting height
• Floating 3 point linkage, cat. 1
• 8 reinforced mower deck
• Spindle shafts greased from the top for easy service
• Safety chain shield standard
• Two heavy duty reinforced belts (SPBX)
• Heavy duty, one piece, balanced steel pulleys
• Heavy duty shielded PTO shaft (1 3/8″ ASAE cat. 3)
• Stamped steel wheel yokes

STANDARD FEATURES

Reversible hitch for front and rear mounting
Reversible three point hitch for front and rear tractor mounting.

Gearbox with spiral gears
Gearboxes are manufactured by BEFCO and come equipped with spiral gears that ensure better power transmission, increase longevity and reduce noise.

Manual belt tensioning
Manual belt tensioner maintains constant tension on belts without stretching them like a typical spring loaded idler would. This means that belts last much longer and there is no spring loaded idler that needs to be disassembled at the end of the mowing season to prevent it from stretching the belts during the winter months.

Double belt transmission
Two heavy duty reinforced belts (SPBX) with manual tensioner provide over 180° coverage of all pulleys and reduce belt maintenance.

Cast iron pulleys
Heavy duty, individually balanced cast iron pulleys are more durable than steel or plastic ones often used by competitors and do not get damaged whenever serviced.

Axial grease fittings
Spindles are quipped with axial grease fittings that allow operator to grease spindle from the top without having to remove the belt shields.

Stamped steel reinforced wheel arms
Only BEFCO mowers are equipped with reinforced stamped steel wheel arms. These wheel arms are stronger than the ones made of bent tubing used by the competition and always guarantee a perfectly even surface for the mower to rest on.

Choice of solid or pneumatic tires
Customers can choose between solid (10″x3.2″) or pneumatic tires (11″x4″).

Pins that stay in place
Mowers that use traditional cotter pins often lose them when the mower gets too close to a bush. This not only causes the loss of the pin but may also cause the loss of the height adjustment spacers and in some cases even the wheel yokes.
For this reason, BEFCO designed and manufactured a pin that will stay securely fastened under almost any circumstances.

Chain shielding
Mowers are equipped with chain shields to provide additional safety from thrown objects.

ASAE Cat. 1 quick hitch compatible
Compatible with ASAE Cat. 1 quick hitches when equipped with optional quick hitch adapter.