Browse EquipmentNew Holland Discbine® 312 (Chevron Rubber)
Features
LOW, SMOOTH CUTTING
The new low-profile disc cutterbar cuts low and clean, resulting in uniform stubble height, even in light grasses, or tough and tangled crops.
CENTER-PIVOT MANEUVERING
Mow right or left or any way you like with the productive, center-pivot design.
LOW POWER REQUIREMENT
You get the big productivity of 10’ 4’’ and 11’ 6’’ cutting widths with a mere 80 or 87 PTO horsepower.
EFFECTIVE CONDITIONING CHOICES
Choose the best conditioning system for your crops – chevron rubbers rolls or the all-new Y-tine flail system.
Specifications
| Discbine® 312 (Chevron Rubber) | |
| Cutterbar | |
| Cutting width ft. in. (m) | 11' 6" (3.51) |
| Cutterbar type | Low profile disc cutterbar |
| Number of discs | 9 |
| Knives per disc | 2 |
| Tilt angle degrees | 0-9° |
| Flotation | Top Safe cutterbar angle & vertical movement |
| Theoretical cutting height in (mm) | 1-3.9 (25-100) |
| Cutting height w/opt. high-stubble shoes in (mm) | 2.2-5.1 (55-130) |
| Roll Conditioner | |
| Type | Chevron Rubber Roll |
| Width ft. (m) | 9.5 (2.92) |
| Drive method | Belt driven, synchronized roll drive |
| Speed rpm | 970 |
| Conditioner roll tension adjustment | Spring Tension |
| Conditioner gap adjustment | Adjustable, stop bolt |
| Steel Y-Tine Flail Conditioner | |
| Type | - |
| Drive method | - |
| Speed rpm | - |
| Conditioner gap adjustment | - |
| Crop discharge | |
| Swath width ft. (m) | 6.5 (2.0) |
| Windrow width ft. (m) | 4-6.5 (1.2-2.0) |
| Driveline | |
| PTO shaft spline/size | 1 3/8- 21 Spline |
| Input speed rpm | 1000 (only) |
| Drive protection | Combined Friction Slip & Overrunning Clutch Assembly |
| Tongue | |
| Type | Center Pivot |
| Hitch type | 2-point semi mounted swivel hitch attachment, Category II Only (Not quick hitch compatible) |
| Tractor Requirements | |
| Minimum PTO power requirement hp (kw) | 87 (64) |
| Hydraulic circuits required | 1 SA, 1 DA |
| 3-pt. hitch category | Category II, Three-point |
| Tires | 380/55-17 Tubeless Ag Rib Implement Tires |
| Transport speed mph (kph) | 20 (32) |
| Dimensions | |
| Width transporting ft. in. (m) | 11' 4" (3.46) |
| Width operating ft. in. (m) | 17' 10" (5.45) |
| Length transport ft. in. (m) | 21' (6.41) |
| Height transport ft. in. (m) | 6' 5" (1.95) |
| Ground clearance with head fully raised in. (mm) | 19 (481) |
| *Weight lbs (kg) | 5776 (620) |
⚠WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
