Doosan DL450-5 Wheel Loader / NOT AVAILABLE
Powered by impressive horsepower and breakout force, you can count on the Doosan DL450-5 wheel loader to handle even the biggest amounts of material. It’s an ideal machine for mining and infrastructure applications.
With the high lift option, you’ll gain additional lift height and reach. Easily load materials like cement, coal, grain, fertilizer, or waste into high-sided trucks, hoppers or mixers. High lift is ideal for processing plants, scrap and recycling facilities, and agricultural operations.
This wheel loader size is particularly useful for handling granular materials such as sand and gravel in industrial, mining and quarrying applications. The powerful hydraulic system shortens cycle times and the limited slip differentials help you work with confidence in soft or muddy conditions.
The standard Z-bar lift arm design minimizes spillage while increasing productivity. Designed for heavy loads, the lifting geometry has fewer moving parts and precise positioning in all situations. Unload sticky or wet materials with the rapid bucket dump capabilities. Ensure gradual, precise control with the load sensitive control system.
|Rated Flywheel Power (Gross)||344.6 hp @ 1,800 rpm|
|Rated Horse Power (Net)||344.6 hp @ 1,800 rpm|
|Max. Torque (Net)||1180 lbf·ft @ 1,300 rpm|
|Main Pump: Displacement||140 cm³/rev|
|Boom Speed - Up (Loaded)||6.1 s (±0.5 s)|
|Boom Speed - Down||3 s (±0.4 s)|
|Bucket Speed - Dump||1.6 s (±0.3 s)|
|Main Pump: Max. Flow Rate (each)||70.27 gal/min|
|Main Pump: Main Relief Pressure||315 bar|
|Total Cycle Time||10.7 s (±0.3 s)|
|Travel System/Drive Mechanism|
|Travel performance: Gradeability||30° @ 58 %|
|Traveling performance: Max. Tractive Effort||52,029 lb|
|Operating Weight||56,868 lb|
|Bucket Capacity||4.8 m³|
|Bucket Width||10' 9"|
|Hinge Pin Height||14' 9"|
|Dump reach at 45° (fully raised)||4' 2"|
|Dump height at 45° (fully raised)||10' 7"|
|Overall Height||11' 9"|
|Overall Length||30' 0"|
|Wheel Base||11' 7"|
|Ground Clearance||1' 5"|
|External Turning Radius at Bucket Edge||23' 5"|
|Static Tipping Load (Straight)||45,228 lb|
|Static Tipping Load (Full Turn)||39,937 lb|
|Breakout Force||51,931 lbf|
|Rear Axle Oscillation||22°|
|Travel Speed Forward - 1st gear||4.04 mph|
|Fuel Tank||88.76 gal|
|Cooling System||13.97 gal|
|Hydraulic System||72.65 gal|
|Hydraulic Tank||59.7 gal|
⚠WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.