New Holland H7150 Trail Frame and HS16 Haybine® Head

Haybine Mower-Conditioner H7150 Trail Frame and HS16 Haybine® Head

Double tap to zoom

 

Features

THE CONVENIENCE OF A PIVOT-TONGUE HITCH 
Get the capacity of a self-propelled windrower with the center-pivot design that’s standard on the H7150 trail frame when equipped up with an HS Series 14-, 16-, or 18-foot head.

MODEL H7150 and HS SERIES HAYBINE HEAD: CONDITIONING SYSTEM OPTIONS 
For the commercial hay producer, a range of conditioning roll options includes our versatile chevron-design intermeshing rubber rolls. The gentle handling and full-stem crimping and cracking action promotes fast drying while protecting delicate leaves for maximum forage quality. Choose durable chevron-design intermeshing steel rolls when cutting green feed forage crops, extra-tall grasses, and cane-type crops. The steel chevron-design feeds crop uniformly and all-steel construction resists wear in abrasive crops and conditions. If you’re considering full-stem crushing for fast drying, high-contact rolls are specially machined for an exact fit for complete stem conditioning. These urethane rolls feature a machined groove to grip and move crop efficiently without sharp angles that can damage valuable leaves.

Specifications

H7150 Trail Frame and HS16 Haybine® Head
Auger
Auger Single, full floating, 20-in (508 mm) auger with 5 in (178 mm) flighting
Floating range, in. (mm) 2 (50.8)
Speed, rpm 287
Conditioner
Conditioner Chevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment
Roll length (crushing area), in. (mm) 102 (2591)
Roll diameter, in. (mm) 10.375 (263.5)
Drives    Spur drive gearbox and PTOs
Speed, rpm  717
Pressure, lbs./in. (N/mm) 2 to 38 (0.3 to 6.6)
Roll gap adjustment Wrench
Material discharge, in. (mm) Adjustable gate for swath, windrow or intermediate widths
   38 and 96 (965 and 2438)
Cutterbar
Cutterbar Two opposing assemblies, timed, dual, counter-stroking sickles
Knives Bolted, over-serrated sections, adjustable hold-dohold-downs
Guards Twin, forged steel, double-hardened
Cutting height, in. (mm) 1.2 to 6.2 (30 to 157)
Cutting angle, degrees -6 to -12
Hydraulic tilt Standard
Guard points max lift, in. (mm) 25 (635)
Skid shoes 4
Sickle drive Open, dual wobble
Sickle speed, spm 1810
Sickle stroke, in. (mm) 3 (76)
Cutting Width
Cutting Width, ft. in. (mm) 16' 3" (4953)
Dimensions
Overall width, operating, ft. in. (mm) 18'3" (5563)
Overall width, transport, ft. in. (mm) 18'3" (5563)
Overall length, transport, ft. in. (mm) 25’ 11” (7900)
Overall height, operating, ft. in. (mm) 6’ 1” (1850)
Overall height, raised, ft. in. (mm) 6’ 8” (2030)
Drive
Drive 1000 rpm PTO
Hydraulic Cylinders
Hydraulic Cylinders Standard header lift, Standard tongue shift
Minimum Tractor Req
Minimum Tractor Req Two remote hydraulic circuits required capable of 1750 (12066)
  70 (52)
Operating Speed
Operating Speed, mph (kph) up to 8 (13)
Max safe transport speed, mph (kph) 20 (32)
Reel
Reel 5-bat, all steel, segmented tine bars and full-flex tines
Peripheral speed, mph (kph) 6.5 to 10.9 (10.46 to 17.54)
Speed Adjustment Variable sheave
Diameter (maximum), ft. in. (mm) 3’ 6” (1067)
Adjustments Fore/aft, vertical, pitch
Drive  Belt and chain
Bushings/bearings, in. (mm) 1.25 (31.75) bearing w/collar at cam end and bushings at all other locations
Tires
Tires 31 x 13.50-15, 8PR flotation
Tractor Hookup
Tractor Hookup Tongue-mounted, swiveling pump
Weight
Weight, lbs. (kg) 7045 (3196)